Glow Plug Removal Kit M8/M10 16Pieces

Specification:
Condition: 100% Brand New
Item Type: Glow Plug Removal Tool Kit
Material: steel.
Color: As picture show
Box size: approx. 28 x 22 x 5 cm / 11 x 8.7 x 2 inches.

Instructions:
1. The T-profile nut is placed on the centre electrode.
2. The electrode is removed with a gun. All the way around! Remove the center electrode. If the center electrode has not cut off at the breaking point, unscrew the electrode and focus it with the part (the sleeve) by unscrewing it.
3. The sleeve is placed on the middle electrode, fixed and the included drill is unscrewed.
4. Insert the handle drill and drill to the right. Apply this drill sleeve lightly and apply a thick layer of grease (grease).
Attention: at low speed, punctures several times during the drilling process and impurities are removed. The Pierce to the end.
5. Tap drill cut a ¼ inch thread length in layer 2 cm plug. It is especially important that you then remove impurities.
6. Threaded adapter turns the extraction and screws the ¼ inch spark plug thread.
7. Sleeve lingerie tubes are created as a support and Dessurubeaza dirt plug with compression nut.
8. Then insert the Reta thread.
9. Apply a thick layer of grease to the screwed drill so that no dirt falls into the combustion chamber of the engine.

Package contents:
1 x Ratchet T-bar
1 x drill holder adapter.
1 x outer casing of the puller.
2 x nuts.
1 x star socket for removing the upper connection.
1 x Allen key.
3 x tap (1/4 in, M8, M10).
2 x high strength step drill (M8, M10).
2 x pilot drill bits (3.5 mm).
2 x puller adapter mandrel.
1 x plastic box.

Delivery Within 2 To 3 Working Days. Door To Door Delivery Within South Africa

Product Type : New

Terms Conditions Apply To All Orders As Per Our Company Policy